A green LED indicator shows proper unit function, with a swivel DC plug and a built-in 10 amperes fuse.
BATTERY GUARD 12V FREE
Important! The aluminium base plate must not be exposed to mechanical tension (do not drill holes, do not screw on an uneven cooling surface, etc.). Battery monitoring with your smartphone - with the Battery-Guard you always keep an eye on your battery.With the Battery-Guard and the free Apple or Android. Schumacher's Battery Guard provides two 12 Volt universal sockets, allowing up to 10 amperes current draw, with auto power cut-off to protect low vehicle battery. The screw heads must rest on the plate of the module, rather than on the plastic edge of the module! During assembly, the module should not be curled up (if the ground is not flat). The aluminum plate on the bottom of the module must not bend, do not use larger screws and do not drill larger holes. This may be the back wall of a metal casing.
It is important that the module is fixed with 4 M3 screws (or 2.9 mm metal screws) on the cooling surface. Battery Guard 3000 is a fully programmable power management system and is available in 12V & 24V and. Under certain circumstances it must be mounted on a cooling surface according to installation instructions. Introducing the Battery Guard 3000 from Intellitec MV. The heat is dissipated from the aluminum plate at the bottom of the module. The base plate of the module must not heat up to more than 70☌ during continuous operation.ĭepending on the load the module heats up.
10 x 15 x 0.5 cm or the like with a similar cooling effect. In case of higher currents 10 - 20 A the module has to be mounted with a metal plate planely on another larger metal plate so that the heat will be carried off.
The module should, however, be installed “well ventilated” so that any heat that may possibly occur is carried off from the metal plate through circulation of air. The module is installed in such a manner that it is not exposed to humidity, strong vibrations or great heat. No additional cooling is required for load currents up to approx. The interrupting voltage is adjustable: approx. It switches on again automatically after return of the normal voltage. This battery saver protects your car battery from total discharge by switching off consumers such as ice boxes, heaters, radios + television sets, etc.
0 kommentar(er)
